Lipu wood hanger, as the name suggests, is made of wood hanger. Wood is a kind of biological organism, it is the green natural commodity that everyone touches the most widely, lipu wood hanger factory makes wood hanger wood to have many, such as beech, lotus, rubber, ash, black walnut, pine, miscellany wood and so on. If not properly handled, wooden hanger will show the appearance of decay, cracking, deformation, dirt and so on.

Lipu wood hanger encounter water as little as possible, will reduce the service life, usually with soft cloth along the grain of wood, to dust for hanger, do not use dry cloth wipe, it will rub the surface. Avoid contact with corrosive liquids, alcohol, nail polish, etc. on the surface of wooden hanger. At the same time, usually do not fall from high to the ground, metal parts as far as possible do not come into contact with sweat, this will produce a chemical reaction and embroidery. In short, wooden hanger in all hanger, or more practical and longer service life.

1. Wooden hanger is simply dry and cracked in a dry climate, and the painted hanger is easy to fall ash, which is a common appearance. This can be prevented. Wood hanger should be prevented from being placed in a place that can be exposed to the sun. It should probably be placed in a ventilated, dry and humidity environment, and should not be maintained in the sun or cloudy and rainy days.

2. The dust on the paint hanger can be used with a soft cloth along the grain of the wood to dust the hanger. Before dust removal, the soft cloth should be stained with spray cleaning agent (Bibezon), do not use dry cloth to wipe, to prevent rubbing flowers. In general, the maintenance products such as green bead is a good choice for the maintenance of such wood products. BiLizhuo can make its appearance to form a layer of maintenance film, waterproof, dustproof, anti-scratch. Lipu clothes hanger factory to deepen the maintenance of wood, so that the wood light plump, delay their gradually fade due to sunshine or ultraviolet light, dry crack, shell and aging appearance. And easy to use, a spray, a wipe, dust removal, glazing, maintenance a complete.

3. If the wooden hanger is too dry, it is very simple to crack and crack. If it is found that there has been a part of the crack may crack, it can squeeze the maintenance products into the crack with a small tool to prevent its continuous expansion. After long-term use, the appearance of wooden hanger will crack, so the usual cleaning and maintenance work can not be too idle.

4, the hanger factory needs to constantly adhere to the cleaning of the hanger, do not let the day dirt for a long time attached to the wooden surface, resulting in the formation of dirt, will not be able to eradicate.

5. The deformation of the hanger is mainly because the water content of the wood is too much, the temperature is too high, and the hanging clothes may exceed the acceptable weight of the hanger. In the process of maintenance, attention should be paid to the ventilation and dry humidity of the wardrobe, and appropriate hanger should be selected according to the weight of clothes.